Vivo Y500 8GB 256GB

1. The typical battery capacity is 8100 mAh; the rated capacity is 7920 mAh.

2. The data comes from our in-house lab tests and applies only to single-app use conditions. Test environment: ambient temperature at 25°C±1°C. Test environment: Device fully charged, screen brightness set to 150 nits, volume at 63 dB. Actual battery life may vary depending on usage habits, environment, and other factors.

3. At least 80% of the battery's capacity is retained after 1600 complete charge cycles, according to vivo's laboratory test results. These tests simulate daily user habits (charging and discharging completely once every 1.4 days) and indicate that 1600 cycles are equivalent to approximately 6 years of use. The above data was provided by vivo's lab based on tests conducted in a simulated environment with ambient and battery temperatures of 23°C±2°C for a full charge and discharge. Actual results may vary depending on the test equipment, test environment, and personal usage patterns and habits.

4. Data is obtained from vivo's laboratory tests.Actual battery life is subject to actual usage and may vary due to environmental and other factors.

5. This product has been tested under controlled laboratory conditions and is rated as IP68 and IP69 under IEC standard 60529-2013. IP68 water resistance test conditions: Submerged in static fresh water up to 1.5 meters deep for up to 30 minutes, with a temperature difference between the water and the device of less than 5°C. IP69 water resistance test conditions: A rotation speed of (5±1) rpm, nozzle angles of 0°, 30°, 60°, and 90°, a flow rate of (15±1) L/min, a water temperature of (80±5)°C, a test time of 30s/position, and the phone placed in a vertical position with the USB port facing down. The ambient temperature range is 15°C to 35°C. This product is not a professional waterproof phone. The resistance to splashes, water, and dust is not permanent and may be reduced with daily use. Do not immerse the phone in water during daily use or expose it to solutions such as seawater or other liquids such as beverages. Do not charge the phone when it is wet; instead, clean and dry it immediately. Damage caused by liquid ingress is not covered by warranty.

6. "Protection against multiple liquids" means the phone can effectively prevent malfunction or hardware damage when exposed to ketchup, coffee, cola, tea or soapy water. After splashes, liquids may block the microphone, receiver, or speaker ports, affecting call or speaker performance. Please rinse with clean water, shake off excess, air dry, or visit an official service center for professional cleaning. Water and dust resistance may decrease with daily use—actual experience may vary.

7. Y500 is not a professional waterproof phone. The water resistance scenarios described above demonstrate the device's water resistance when it is brand new. The resistance to water is not permanent and may decrease over time. We recommend that you use a professional waterproof case for underwater photography.Please follow the official guidelines when using the water resistance feature. Do not immerse the phone in non-fresh water during use. Please shoot underwater at a maximum depth of 1.5 meters, and don't use it continuously for more than 30 minutes. After using the phone underwater and removing it from the water, tap and hold the corresponding button on the screen to exit the Underwater Mode and allow the water to drain. Then, place the phone in a dry, well-ventilated area to dry. Avoid charging or connecting external devices to the Type-C port until it is completely dry. Do not use high-temperature heating methods such as a hair dryer to dry the phone, which may damage the phone. Please note that due to changes in temperature and humidity, condensation and fogging may occur in the lens when the phone is immersed in water, which can be resolved by placing the phone in a constant temperature, low humidity environment for approximately 20 minutes. Damage caused by liquid ingress due to use of this feature without following official water resistance test conditions is not covered by warranty.

8. "Wet-hand touch" or "greasy-hand touch" means that in everyday situations where your fingers get wet or oily, the screen can still respond to taps, swipes, and other gestures. Actual touch performance may vary depending on how wet or oily your fingers are.

9. This product has been tested under controlled laboratory conditions. As a precision electronic product, the phone still carries a risk of damage from drops. Please be careful to avoid drops and collisions. Any damage caused by improper handling is not covered under warranty.

10. "50-Month Smooth Experience" indicates that this product has passed the 50-month smoothness testing in vivo lab test environments through an all-around technological optimization covering hardware and software. 50-Month Smooth Experience does not mean no latency at all. The actual experience may vary depending on the network environment, personal usage habits, and other factors.

11. Measured diagonally, the screen size is 6.83 inches in the full rectangle. The actual display area is slightly smaller.

12. This product is SGS-certified for low blue light when eye protection mode is enabled and brightness is set to maximum. It is not a medical device and does not provide any therapeutic benefits.

13. Data is sourced from vivo labs based on comparison with Y400/V60 Lite equipped with the Snapdragon 685. Test environment: ambient temperature at 25±0.5°C. Test conditions: over 90% of battery level, screen brightness at 100±5 nits, media volume off, and Boost mode enabled. "Overall performance improved by 30%," "CPU performance improved by 28%," and "GPU performance improved by 44%" refer to the comprehensive score improvement tested on AnTuTu Benchmark V11.1.1. Test results are subject to software versions, system environments, and device conditions. The actual experience shall prevail.

14. All the data mentioned above is obtained from vivo lab tests conducted by vivo in controlled environments. The actual performance of the product may vary under real-world conditions.