Cisco SG550X-48P-K9 (POE) Gigabit Layer 3 Stackable Switch

Product Name

SG550X-48

General

Product ID

SG550X-48-K9

Short Description

Switch: L3 managed, 48 x 10/100/1000 + 2 x 10 GE combo + 2 x 10GE SFP+, rack-mountable

Device type

Switch: 1G, 48 ports, L3 managed

Enclosure type

Rack-mountable, 1RU

Ports

48 x 10/100/1000 + 2 x 10GE copper/SFP+ combo + 2 x 10GE SFP+

Power over Ethernet (PoE)

None

Switching capacity

176 Gbps

Forwarding performance (64-byte packets)

130.94 Mpps

MAC address table size

16,000 entries

Capacity (active VLANS)

4000

Routing protocol

RIPv2, VRRP, PBR, static IPv4/IPv6 routing

Remote management protocol

SNMPv1, RMON1, RMON2, RMON3, RMON9, Telnet, SNMPv3, SNMPv2c, HTTP, HTTPS, SSH, CLI

Features

Stacking, flow control, Layer 2 switching, Layer 3 switching, VLAN support,

IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, access control list (ACL) support, quality of service (QoS), reset button,

LACP support, Energy Efficient Ethernet, dynamic VLAN support (GVRP), advanced threat protection, IPv6 first-hop security,

static routing, dynamic routing, policy based routing, sFlow, RSPAN, hardware redundancy

Compliant IEEE standards

802.3, 802.3u, 802.3z, 802.1D, 802.1Q, 802.3ab, 
802.3ae, 802.3an, 802.1p, 802.3x, 802.3ad (LACP), 802.1w, 802.1x, 802.1s, 802.3az

RAM

512 MB

Flash memory

256 MB

Status indicators

System, Master, Fan, RPS, Stack ID, Link/Speed per port

Expansion and Connectivity

Interfaces

48 x 10BASE-T/100Base-TX/1000BASE-T, RJ-45, 2 x 10GBASE-T/SFP+ combo, 2 x SFP+, 1 x console, RJ45, 1 x RPS port

Power

Power supply

Internal

Voltage required

AC 120/230V (50/60 Hz)

Miscellaneous

Width

17.3 in. (440 mm)

Depth

10.1 in. (257 mm)

Height

1.7 in. (44 mm)

Weight

8.22 lb (3.73 kg)

Cables included

1 x console cable

Compliance standards

UL 60950, FCC Part 15 A, CSA 22.2