Canon EOS R6 + RF24-105mm F4-7.1 IS STM Kit

Specifications

Type

Digital interchangeable lens, mirrorless camera

Recording Media

(Two) SD card slots

Compatible with UHS-II

Eye-Fi cards and Multimedia cards (MMC) are not supported.

Compatible Lenses

Canon RF lens group (excluding EF, EF-S and EF-M lenses)When using Mount Adapter EF-EOS R: Canon EF or EF-S lenses (excluding EF-M lenses)

Lens Mount

Canon RF mount

Image Sensor

Type

CMOS sensor (compatible with Dual Pixel CMOS AF)

Effective pixels

Approx. 20.1 megapixels

Screen Size

Approx. 36.0 x 24.0 mm

Pixel Unit

Approx. 6.56 µm square

Total Pixels

Approx. 21.4 megapixels

Aspect Ratio

3:2 (Horizontal:Vertical)

Color Filter System

RGB primary color filters

Low Pass Filter

Installed in front of the image sensor, non-detachable

Dust Deletion Feature

Self Cleaning Sensor Unit

Removes dust adhering to the low-pass filter.

At power off only / Enable / Disable. Performed automatically (taking about approx. 2 sec. as indicated on the screen) or manually (taking about approx. 8 sec. as indicated on the screen).

After manually activated cleaning, the camera will automatically restart (Power OFF to ON).

When [Multi Shot Noise Reduction], [Multiple exposures], or [HDR mode] is set, [Clean now] and [Clean manually] cannot be selected.

Dust Delete Data acquisition and appending

The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended to subsequent images.

The dust coordinate data appended to the image is used by the EOS software to automatically erase the dust spots.

Not available with EF-S lenses, in cropped shooting or multi-exposure shooting.

Manual cleaning (by hand)

Recording System

Recording Format

Compliant to Design rule for Camera File system 2.0 and Exif 2.31*.
Supports time difference information in Exif 2.31.

Image Format

JPEG, HEIF, RAW / C-RAW (CR3), C-RAW (Canon original) ; Movies: ALL-I (Time-lapse video only), IPB, MP4

File Numbering

The following file numbers can be set:

File numbering methods

Continuous numbering

The numbering of captured images continues even after you replace the card.

Auto reset

When you replace the card, the numbering will be reset to start from 0001. If the new SD card already contains images, the numbering will continue from the last recorded image in the card.

Manual reset

Resets the file number to 0001, and creates a new folder automatically.

RAW + JPEG / HEIF Simultaneous Recording

Simultaneous recording of any combination of RAW/C-RAW and JPEG/HEIF image-recording quality is supported.

Color Space

Selectable between sRGB and Adobe RGB

Picture Style

Auto

Standard

Portrait

Landscape

Fine Detail

Neutral

Faithful

Monochrome

User Defined 1-3

In Scene Intelligent Auto, [Auto] will be set automatically.

[Standard] is the default setting for [User Def. 1-3].

White Balance

Settings

Auto (Ambience priority/White priority)

Day Light

Shade

Cloudy*

Tungsten light

White fluorescent light

Flash

Custom (Custom WB)

Color temperature

Effective also in twilight and sunset.

Auto White Balance

Option between ambience priority and white priority settings, using SET button

White Balance Shift

Blue/amber bias: ±9 levels
Magenta/green bias: ±9 levels
Corrected in reference to the current WB mode's color temperature.

Viewfinder

Type

OLED color electronic viewfinder

Coverage

Approx. 100% vertically and horizontally relative to the shooting image area (with image quality L, at approx. 23mm eyepoint).

Magnification / Angle of View

Approx. 0.76x / Approx. 35.2 degrees (with 50mm lens at infinity, -1 m^-1)

Eye Point

Approx. 23mm (at -1 m^-1 from the eyepiece lens end)

Viewfinder Information

Maximum burst

Possible shots/Sec. until self-timer shoots

Focus Bracketing/ Multiple-exposure/HDR shooting/Multi Shot Noise Reduction/Bulb time/Interval timer

Shooting mode

AF method

AF operation

Image quality

Card

Drive mode

Metering mode

No. of remaining shots for focus braketing, multiple exposures, or interval timerv

Electronic level

Movie recording time available

Battery level

Image Stabilizer (IS mode)

Histogram (Brightness/RGB)

Quick Control button

Anti-flicker shooting

White balance/White balance correction

Picture style

Auto Lighting Optimizer

Still photo cropping / Aspect ratio

AF point (1-point AF)

AEB/FEB

View Assist

HDR PQ

Flash ready / FE lock / High-speed sync

Electronic shutter

Touch shutter / Create folder

AE lock

Shutter speed / Multi-function lock warning

Aperture value

Wi-Fi function

Wi-Fi signal strength

Bluetooth function

Exposure simulation

Magnify button

ISO speed

Highlight tone priority

Exposure compensation

Exposure level indicator

Autofocus

Focus Method

Dual Pixel CMOS AF

Number of AF zones available for Automatic Selection

AF area: Horizontal: Approx. 100% x Vertical: Approx. 100%
(100% x 100% AF coverage in Face Detect + Tracking AF; coverage can vary, depending upon lens being used)
Stills: Max. 1053 zones (39 x 27)
Movies: Max. 819 zones (39 x21)

Selectable Positions for AF Point

AF area: Horizontal: Approx. 90% x Vertical: Approx. 100%
Stills: Max. 6072 positions (92 x 66)
Movies: Max 4968 positions (92 x 54)

AF Working Range

EV -6.5 to 20 (f/1.2 lens*, center AF point, One-Shot AF,at 73°F/23°C, ISO 100
Except RF lenses with a Defocus Smoothing (DS) coating.

Focusing brightness range (in movie recording)

EV -5 to 20 (f/1.2 lens*, center AF point, One-Shot AF,at 73°F/23°C, ISO 100
Except RF lenses with a Defocus Smoothing (DS) coating.

Available AF Detection zones

Zone AF	9 x 9
Large Zone AF: Vertica	Max. 9 x 21
Large Zone AF: Horizontal	Max. 31 x 9
Face+Tracking (Auto selection with nothing detected)	Max. 39 x 27

Eye Detection

Auto:

Selects the eye closer to the camera (as detected from the angle of the face).

At the same distance from the camera, selects the eye closer to the center of the image.

Manual:

Can be selected by touch.

Can be selected with the Multi-controller.

Exposure Control

Metering Modes

Real-time metering with image sensor (384 [24x16] metering zones)

Evaluative metering (AF point-linked)

Partial metering (approx. 5.8% of the area at the center of the screen)

Spot metering (approx. 2.9% of the area at the center of the screen)

Center-weighted average metering

Metering Range

EV -3 - 20 (at 73°F/23°C, ISO 100)(Still Photo Shooting)

Exposure Modes

Scene Intelligent Auto

Flexible-priority AE (Fv)

Program AE (P)

Shutter-priority AE (Safety shift possible) (Tv)

Aperture-priority AE (Safety shift possible) (Av)

Manual exposure (M)

Bulb

Custom shooting mode C1, C2, C3

Exposure Compensation

User-set	±3 stops in 1/3- or 1/2-stop increments
AEB	±3 stops in 1/3- or 1/2-stop increments

AE Lock

Auto AE lock

The metering mode for AE lock after focus can be customized.

User-set AE lock

In the Fv, P, Tv, Av and M modes, enabled with the AE lock button. (Press again to update.)

Enabled in all metering modes.

Shutter

Type

Electronically controlled focal-plane shutter

Electronic first curtain

Mechanical shutter

Electronic shutter*

Cannot be used in conjunction with the following functions: flash photography, HDR shooting, multiple exposures, Multi Shot Noise Reduction, AEB, HDR PQ, anti-flicker shooting, Dual Pixel RAW shooting, Digital Lens Optimizer [High].
A shutter release sound is not generated. However, note that the sounds other than the shutter release sound (aperture, focusing lens drive sound/electronic sound, etc.) may be generated.

In electronic shutter shooting under conditions such as flash firing by other cameras or with fluorescent lighting or other flickering light sources, a strip of light or banding due to the brightness difference may be recorded in the image.

Shutter Speeds

When [Mechanical] or [Elec. 1st- curtain] is set: 1/8000-30 sec, bulb
When [Electronic] is set: 1/8000-0.5 sec.

Shutter Release

Soft-touch electromagnetic release

Self Timer

10-sec. delay, 2-sec. delay

Image Stabilization (IS mode)

Still Photo IS

In-body IS operation can be selected when using a non-IS lens.

Always on

Only for shot (no stabilization in viewfinder/LCD screen between shots)

External Speedlite

E-TTL balance

Ambience priority, standard, flash priority

Flash Exposure Compensation

±3 stops in 1/3- or 1/2-stop increments

Continuous flash control

E-TTL each shot

E-TTL locked after first shot in sequence

Video Shooting

Shooting Times

Resolution and Frame Rate	Mode	Approx. shooting time (23°C / 73°F)*1	Recommended scene
4K 60p	94% sensor width (5.1K oversampling)	30 min	Independent films shooting action or with the option of slow motion at high resolution.
	APS-C Crop	35 min*2	Independent films shooting action at high resolution with the need for additional reach for sports or wildlife or tighter crops.
4K 30p	94% sensor width (5.1K oversampling)	40 min*3	General purpose.

¹ Time available for continuous shooting in 23°C / 73°F environment, from a cold start. If the camera is in LV mode standby before shooting or the ambient temperature is high, the shooting time may be shorter.

² Recording stops at 7minutes and 30seconds for high frame rate video. Indicates the time when recording can be resumed immediately.

³ Recording is limited to 29 minutes 59 seconds. Indicates the time when recording can be resumed immediately.

Estimated Camera Recovery Time

Estimated recovery times are indicated below. These are affected by various factors such as ambient temperature, continued camera operation and the selected shooting resolution.The time until full record time is available will vary with ambient temperature.

Resolution and Frame Rate	Waiting period (minutes) (23°C / 73°F)	Approximate maximum recording time after waiting period (minutes)
4K 60p	10	5

LCD Screen

Type

TFT color, liquid-crystal monitor

Monitor Size

3.0-inch (screen aspect ratio of 3:2)
2.95 in./7.5cm diagonal (2.44 in./6.2cm width, 1.65 in./4.2cm height)

Dots

Approx. 1.62 million dots

Coverage

Approx. 100% vertically/horizontally

Brightness Control

Manually adjustable to one of seven brightness levels

Touch-screen Operation

Supported for AF Point selection; Touch AF; Touch Shutter; Menu selection; Quick Control Menu; Magnified view

Coating

Clear View LCD II

Anti-smudge coating applied.

Anti-reflection coating not applied.

Interface Languages

29 (English, German, French, Dutch, Danish, Portuguese, Finnish, Italian, Ukraine, Norwegian, Swedish, Spanish, Greek, Russian, Polish, Czech, Hungarian, Vietnamese, Hindi, Romanian, Turkish, Arabic, Thai, Simplified/Traditional Chinese, Korean, Malay, Indonesian, Japanese)

Playback

Highlight Alert

The white areas with no image data will blink.

Histogram

Brightness and RGB

Quick Control Function

Function

The Quick Control screen is accessed by pressing the Quick Control button during still photo shooting.

Image Protection and Erase

Protection

Single image (select image)

Select range

All images in folder

All images on card

Image browsing and image search can be based on ratings.

Ratings-based image selections also possible with DPP.

All found images (only during image search)

Erase

Except protected images

Select images to erase

Select range

All images in folder

All images on card

All found images (only during image search)

Direct Printing

Compatible Printers

Not supported

DPOF: Digital Print Order Format

DPOF

Compliant to DPOF Version 1.1

Customization

Available Functions

Dial direction during Tv/Av; Control ring rotation direction; Customize buttons; Customize dials

Custom Controls

Customizable Buttons

Shutter button

Movie button

MODE button

AF-ON button

AE lock button

AF point button

Depth of field preview button

Lens AF stop button

Multi-function button

LCD panel illumination button

Set button

Multi-controller

Customizable Dials

Main dial

Quick control dial 1 & 2

Control ring

My Menu Registration

Up to six top-tier menu options and Custom Function settings can be registered.
Up to five My Menu tabs can be added.

My Menu tab overall operations	• Adding a tab    • Deleting tabs in a batch    • Deleting all tab items    • Setting the menu display
My Menu tab detailed operations	• Selecting a registered item    • Sorting registered items    • Deleting selected registered items    • Deleting registered items in a batch    • Deleting tabs    • Changing a tab name (16 ASCII characters)

Interface

USB Terminal

Equivalent to SuperSpeed USB (USB 3.1 Gen 1)

For PC communication

Terminal type: USB Type-C

Shared with terminal for in-camera charging with the USB Power Adapter PD-E1.

In-camera Charging: Equivalent to USB type-C (5 V/1.5 A), but use should be restricted to USB Power Adapter PD-E1.

HDMI Out Terminal

HDMI micro OUT terminal Type D (Resolution switches automatically) / CEC not compatible

Images can be displayed through the HDMI output and on screen at the same time.

Images will not be displayed unless [NTSC] or [PAL] is properly set according to the video system of the TV set.

Microphone terminal

3.5mm diameter stereo mini jack

Headphone terminal

Compatible with 3.5mm diameter stereo mini-plug

Power Source

Battery

Canon LP-E6NH battery pack (also compatible with LP-E6N and LP-E6 battery packs)

With the AC Adapter AC-E6N + DC Coupler DR-E6, AC power is possible.

With the USB Power Adapter PD-E1, in-camera charging of LP-E6NH is possible. The USB Power Adapter PD-E1 is not compatible with powering the camera.

Optional Battery Grip

Compatible with Canon Battery Grip BG-R10
(Accepts one or two LP-E6NH, LP-E6N, or LP-E6 battery packs)

Battery Check

Automatic battery check when the power switch is turned ON.
Displayed in 5 levels in viewfinder, and on LCD screen.
Battery info display in Set-up Menu:

Remaining capacity percentage

Shutter count, on current battery charge

Recharge performance (battery's ability to hold charge; displayed in 3 levels)

Start-up Time

Approx. 0.4 sec.

Based on CIPA testing standards.

Dimensions and Weight

Dimensions (W x H x D)

Approx. 5.45 x 3.84 x 3.48 in. / 138 x 97.5 x 88.4mm
Based on CIPA standards.

Weight

Approx. 1.5 lbs. / 680g (including battery, SD memory card; without body cap)
Approx. 1.3 lbs. / 598g (body only; without battery, card or body cap)

Operating Environment

Working Temperature Range

32-104° F / 0-+40° C

Working Conditions

Working Humidity

85° or less